江苏省科技期刊可视化阅读平台

导航条

江苏科技信息 ›› 2016, Vol. 33 ›› Issue (3): 9-10.doi: 10.3969/j.issn.1004-7530.2016.03.019

• 论文 • 上一篇    下一篇

PTC Creo2.0软件环境下《机械制图》课程教学研究

郭建峰   

  1. 江苏省如皋中等专业学校,江苏如皋,226500
  • 出版日期:2016-01-25 发布日期:2016-01-25

Research on Mechanical Drawing Course Teaching in PTC Creo2.0 Software Environment

Guo Jianfeng   

  • Online:2016-01-25 Published:2016-01-25

摘要： 《机械制图》课程是机电机械专业一门实践性很强的专业基础课程，该课程的主要任务是培养学生的读图、绘图能力。过去传统的教学模式已经很难激起现今学生的兴趣，传统的课堂教学手段难以培养学生的空间思维能力，也很难让学生接受。Creo2.0是PTC公司的最新产品，其功能相当于Proe7.0，该软件强大的建模功能能让学生在学习过程中更直观地掌握平面与空间的转化规律，借助于PTC Creo2.0软件辅助《机械制图》课程教学，在很大程度上能提升学生的学习兴趣及学习效率。文章对PTC Creo2.0软件环境下《机械制图》课程教学研究进行了研究。

关键词: PTC Creo2.0, 机械制图, 教学研究

Abstract: Mechanical Drawing course is a practical professional mechanical and electrical machinery professional foundation course. The main task of this course is to cultivate the students' figures reading, drawing abilities. In the past, the traditional teaching mode has been difficult to arouse the students' interest. It is hard to cultivate students' space thinking ability by the traditional classroom teaching means and it is hard for students to accept the means. Creo2.0 is the latest product of PTC Company, and its function is equivalent to Proe7.0. The powerful modeling function of the software can let the students grasp conversion of plane and space more intuitively in the learning process. We can use PTC Creo2.0 to assist the course teaching of mechanical drawing. It can largely improve the students’ learning interest and learning efficiency. This paper researches on mechanical drawing course teaching in PTC creo2.0 software environment.